Car Mechanic Simulator 2018
Сейчас читаете
CMS 2018: Ford GT90
0
Преврати свою небольшую автомастерскую в первоклассное тюнинг-ателье. Устанавливай этот мод и добавляй Ford GT90 в свою автомобильную коллекцию. Сделай игру еще разнообразнее!
Обзор
Категория:
Авторы:
Версия:

7 Feb 2020

Размер:

168.958 MB

Требуется DLC:

Tuning DLC, Pagani DLC, Ford DLC

Ссылка на файл:

Эта модификация добавляет Ford GT90 в игру Car Mechanic Simulator 2018.

Оригинальное описание: Ford GT90

The best car to never make it to production.

History Lesson
The Ford GT90 is a high performance concept car that was developed and manufactured by American car maker Ford. It was unveiled in January 1995 at the Detroit Auto Show.
The mid-engined GT90 is a spiritual successor to the Ford GT40, taking from it some styling cues, such as doors that cut into the roofline, but little else. In regard to angles and glass, the Ford GT90 was the first Ford to display the company’s «New Edge» design philosophy. The GT90 was built around a honeycomb-section aluminum monocoque and its body panels were molded from carbon fiber.

The GT90’s 48-valve V12 is constructed on an aluminium block and head, displaces 5.9-litres (5,927 cc), and produces an estimated 720 hp (537 kW; 730 PS) and 660 lb⋅ft (895 N⋅m) of torque. It has a redline of 6,300 rpm. It is equipped with a forced induction system that uses four Garrett T2 turbochargers.[3] The engine architecture was based on the 90-degree Ford Modular engine family utilizing a layout similar to that of a paired set of 4.6-litre V8 engines, of which each had 2 cylinders removed. This yielded a 90-degree V12, with a 90.2 mm (3.55 in) bore and a 77.3 mm (3.04 in) stroke with the cylinders arranged in two banks in a single casting.[4] The power produced by the engine is delivered to the rear-wheels through a 5-speed manual transmission developed jointly by FF Developments and Ricardo. The exhaust of the GT90 gets so hot that it would be enough to damage the body panels, and thus ceramic tiles, similar to those on the Space Shuttle, are used to keep the car from melting.

The suspension is a double wishbone variant. The steering is a power-assisted rack-and-pinion. The brakes are ventilated discs.

The GT90, according to Ford, was capable of accelerating from 0–60 mph (0–97 km/h) in 3.1 seconds, 0–100 mph (0–161 km/h) in 6.2 seconds, and had a quarter mile (400 m) time of 10.9 seconds at 140 mph (225 km/h). Top speed was listed as 253 mph (407 km/h).

WHERE TO FIND IT Barns, Junkyards and Auctions

DLC BREAKDOWN Pagani DLC — Needed for the V12 engine
Ford DLC — Needed for wheels

Как установить этот мод: Скачайте файл и разархивируйте. Скопируйте содержимое архива в папку “Car Mechanic Simulator 2018/cms2018_Data/StreamingAssets/Car”.

Избегайте дублирования директорий, следите за тем, чтобы папка имела название автомобиля и содержала файлы модификации.

Или просто нажмите подписаться (Subscribe) чтобы установить мод через Steam.

Оцени этот мод!
Оценка пользователей
Оценить
рейтинг
Bottom Line

Если тебе понравился, или наоборот не понравился этот мод - в любом случае оцени его!

Оценка пользователей
Вы уже оценили
А что скажешь ты?
Супер
0%
Неплохо
0%
Что?
0%
Отстой
0%
Об Авторе
Game Junkie

Оставить Комментарий